100年真空镀膜设备制造商Satisloh ，招收真空镀膜设备工程师学员

Satisloh

Job Description – Service Engineer –Coating-
Position
Service Engineer –Coating-
Organization
The position reports to the Director of Technical Service
Education and experiences
        degree as a mechanical engineer or electrical engineer
        experience in operating and optical thin-film AR coating and hard coating machines by dip
        and /or spin coating. Experience in vacuum technology is preferable
        Excellent skills in problem-solving, excellent organizational skills and excellent teamwork skills
        Min. 2 years working experience in thin-film technology
        Fluent in both spoken and written English (CET4-6 or equivalent level) & Chinese, Mandarin preferable
        Diligent and independent approach
        Well versed in MS Office
        Willing to travel
Work task
        Servicing Satisloh equipment at customer side or in the house such as warehouse and academy
        Supporting the service hotline in any enquiries
Installation and Operation
        Integrate new equipment in existing systems, performing machine installation, function test,
Optimization and adjustment on machines and processes.
        Operate coating machines and manage to the trained customer on our machinery in English and Chinese.
        Evaluation and execution of processes and quality tests: Measuring optical parameters as reflectance curve, transmission, reflection and haze of optical thin film coated lenses. Interpretation of quality test results and documentation of the results.
Maintenance and Trouble Shooting
        Maintenance of coating machines, troubleshooting and reporting problems or possible improvements.
        In case of warranty clarify the root cause, determine the damage/repair scope and forward to
        Supervisor for decision.
        Coordinate work sequence, workmanship etc. (on customer side) with their service people.
        Give suggestions for improving the maintenance and machine output quality with respect to technical regulations and guidelines.
        Error diagnoses on machines and specifies actions to solve errors.
        Furthermore is required to have capability knowledge to detect functional relationships in physical and mechanical fundamentals, basics of control and regulation technology such as electrical components, mechanics, measuring and vacuum technology or pneumatics
Reporting
        Create service trip reports, create protocol (such as measuring and error logs) and document for maintaining and operating machinery.
        Create production protocols on-site throughout the whole process chain and define actions for improving yield and uptime of the equipment


教育和经验
 机械工程师/电气工程/材料化学/ 师学士学位。
 操作和光学薄膜增透膜和硬质镀膜机的经验和/或旋涂。有真空技术经验者优先。
 优秀的问题解决能力、优秀的组织能力和优秀的团队合作能力。
 流利的英语口语和书面语（CET4-6或同等水平）。
 勤奋独立的工作态度。
 精通 MS Office。
 愿意长期出差。
工作任务
 在客户现场或工厂维修真空镀膜机和加硬机设备。
 远程服务支持客户。
安装和操作
        将新设备安装到现有系统中，执行机器安装、功能测试、机器和工艺的优化和调整。
        操作镀膜机/加硬机，并用英语和中文培训客户使用机器。
        工艺和质量测试的评估和执行：测量光学参数 光学薄膜镀膜镜片的反射率曲线、透射反射率和雾度。解释质量测试结果并记录结果。
维护和故障排除
        镀膜机的维护、故障排除和报告问题或可能改进。
        在保修期内明确根本原因，确定损坏/维修范围并转发至主管决定。
        与服务人员协调工作顺序、工艺等（在客户方面）。
        根据技术规程和指导意见，提出改进维修和提高机器输出质量的建议就以下方面提出改进维护和机器输出质量的建议
        对机器进行错误诊断，并指定解决错误的措施。
        此外，还需要具备检测功能关系的能力知识物理和机械基础，控制和调节技术的基础，例如电气元件、机械、测量和真空技术或气动
报告
        创建服务行程报告，创建协议（例如测量和错误日志）和文档用于维护和操作机器。
        在整个生产过程中制定现场生产协议，并定义提高产量和设备正常运行时间的措施


请投简历到如下邮箱

kevin.wang@satisloh.com

萨特隆光学设备中山有限公司

工作地点 广东中山，外派到珠三角或长三角客户现场服务。